Wheel Horse Forum

It is currently Tue Sep 02, 2014 7:31 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
PostPosted: Fri May 28, 2010 11:12 pm 
Offline

Joined: Fri May 28, 2010 1:53 pm
Posts: 17
I just picked up a 1994 ( I think ) 266H it has a Kohler CV16S spec 61514 SN 2404213707 It runs fair smokes some I really need to find a complete parts breakdown. I will probably end up rebuilding next winter but I want to use the tiller that came with it. Any help with where to find preferably onllnie a parts breakdown sure would be great. Thanks Dan


Top
 Profile  
 
PostPosted: Sat May 29, 2010 4:46 am 
Offline

Joined: Fri Dec 17, 2004 8:01 am
Posts: 3745
You can get the parts lists from
http://www.partstree.com/parts/
Type Kohler in the 2nd box and the 61514 spec number in the 3rd box. It comes up as a CV18 - don't know what's up with that.

Kohler owner and service manuals are here
http://www.kohlerengines.com/onlinecata ... es=Command PRO

Garry


Top
 Profile  
 
PostPosted: Sat May 29, 2010 7:41 am 
Offline

Joined: Fri May 28, 2010 1:53 pm
Posts: 17
In regards to the info on the engine showing 18 hp I rechecked the tag and it reads model CV16S Spec # 61514 HP 18 CC 624 SN 2404213707 . Why it indicates 16 hp and all the other info thru the Kohler site says 18 hp not sure why. Maybe someone has the answer. Thru the link you gave me I was able to print a manual. It will help in getting this back in proper working order. The previous owner did very little to keep the motor maintained it smokes some and one of the spark plugs doesn't want tighten down. I need to find out if I can put a helicoil in that head or if I will have to replace it. As for the tractor I will need to get a service manual so I can order some worn out and broken parts like the shaft that runs across from the hydro pedal/brake pedal it is broken on the left side where it looks loke a roll pin or something went thru it. This is a great site with folks like yourself helping out wanna be weekend mechanics like me Thanks again Dan


Top
 Profile  
 
PostPosted: Sat May 29, 2010 8:44 am 
Offline

Joined: Fri Dec 17, 2004 8:01 am
Posts: 3745
Post your tractor's model and serial number and will look to see if there are any service bulletins on it. Some models have quite a few but I'm not familiar with them to recognize the connection.

Garry


Top
 Profile  
 
PostPosted: Sun May 30, 2010 6:12 am 
Offline

Joined: Fri May 28, 2010 1:53 pm
Posts: 17
My 266H tractor is a model 72083 sn 4900585 the deck is model 78260 sn 3900209 the tiller is model 79271 sn 4900308 and last is a snow/dirt blade 79252 sn 5901011 Thanks Dan


Top
 Profile  
 
PostPosted: Sun May 30, 2010 7:57 am 
Offline

Joined: Fri Dec 17, 2004 8:01 am
Posts: 3745
Dan,

There is too much to list here so will post links so you can see everything.
Join the 1st WH Manuals Group
http://groups.yahoo.com/group/wheelhorsetractormanuals/
Go to The Database and open the largest Table. Type a model number in the search box and then look down the results for your year or serial number. The service bulletins are listed with their number and file name. All the bulletins are in the Files of Group #8.
http://groups.yahoo.com/group/wheelhors ... rmanuals8/
Membership in each Group is required.

http://www.partstree.com/parts/
will also give you the illustrated parts lists for everything.
Type Toro in the 2nd box and a model number in the 3rd box. Then select your serial number from the results. The 1st didgit of the serial is the year - 4=1994. The parts that are still available from Toro are priced. These are the most accurate and easy to understand parts lists on the net.

You can get the same ipl's here but the parts lists are terrible and cause many ordering mistakes.
https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro
The good part is after a page opens you can click on a small printer icon at the top left of the illustration and the page will reload to one that prints well. These ipl's are shared by similar models so the same item may be listed 3 times but they fail to tell us what model uses what.

Adding - go here first in case some of the parts lists are available for download in one file.
The Toro manuals listed in the Database can be downloaded from
https://lookup3.toro.com/request/request.cfm
Enter a model number and the serial number.

There is a month's worth of reading there. Let us know if you have trouble getting it.

Garry


Top
 Profile  
 
PostPosted: Sun May 30, 2010 11:23 pm 
Offline

Joined: Fri May 28, 2010 1:53 pm
Posts: 17
Needless to say the amout of info and additional links you have provided I'm sure will prove invaluable. I have to admit I am really getting hooked on searching out all this info and then taking to the next step and putting to use. I bought this tractor for a project for my son and I to work on together. Thanks once again Dan


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: Bing [Bot] and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  


Powered by phpBB® Forum Software © phpBB Group